Conditions of use of protective clothing and proper Dress

As we all know, Personal protective clothing, in our work, to protect our body as a costume, its our job security plays a vital role, so we can not look down upon it. Xiaobian give you about wearing protective clothing is about knowledge.

About user conditions description:

If you want to use protective clothing, then you are sure to have a well under the conditions:

1, a user having a healthy body;

2, the user uses the size of protective clothing must be consistent with the user's body;

3, the user must be through the relevant training, that the use of protective clothing.

Wearing protective clothing on, you must know the knowledge:

1, the use of protective clothing before you, you must be pressure checked to determine that it is not in the case of any defects before use, as well as point to note is that you must follow to choose your work different Different protective clothing;

2, the use of protective clothing, if necessary, it should be mentioned in accordance with its instructions on the inside of your protective clothing top coated eyepiece fogging agent;

3, while wearing Fire fighter clothing when users should ask another person to help, so you can wear protective clothing faster;

4, dressed in protective clothing, please remember that your underwear should be placed on its inside, and we suggest that you choose those with long sleeves and long legs of underwear;

5, dressed in protective clothing, please be sure to give your body remove metal products;

6, wear protective clothing when off, the user should be placed in leg length socks inside, it is convenient to do so into the boot leg inside;

7, put it inside the mask in time, the user should test to see the inside of the gas supply system is not the normal work;

8, will all wear protective clothing, users should feel about yourself and see the vision of the mask which is not clear, and the inside of the air tightness of the pipeline is not connected properly to determine the protective clothing is not in the most good working condition inside.

The use of helmets and precautions

At the construction site, Fireman helmets worn mainly to protect the head does not hurt. It can be used in the following circumstances to protect the person's head from injury or decrease the degree of head injury.
    (A) objects flying or falling down when hit to the head;
    (2) When the operating personnel from 2m and above falls down time;
    (3) when the head may be an electric shock;
    (4) in the low part of walking or operation, the head may collide with a sharp, hard objects.
    Wear a helmet to meet the standards, the use to comply with regulations. If you wear and use is not correct, would not achieve adequate protection. General should note the following:
    (A) the former should wear a helmet with a cap on his head after adjustment model adjusted to fit the position, and then cap elastic band fastened. Cushion elastic strap adjustment by the man's head and body at the top of the cap space vertical distance between 25 ~ 50mm in general, at least not less than 32mm as well. So as to ensure that when subjected to impact, the cap body has enough space for a buffer, usually also conducive to the head and body of the ventilation cap.
    (2) Do not wear a helmet askew, they should not wear a hat in the back side. Otherwise, it will reduce the impact of a helmet for protection.
    (3) under the helmet must buckle in the submandibular tie and fastening, elastic to moderate. That are not the subject wind blow, or other obstructions are knocked, or because the head back and forth, the helmet off.
    (4) In addition to the top of the helmet body cap cap liner is installed inside the body, but some also open ventilation holes. But not when used casually for breathable hole again. Because doing so would reduce the strength hat.
    (5) Since helmet during use, will gradually damage. So regular check, check there is no crack, concave, cracks and wear, abnormal phenomenon should be replaced immediately, not be allowed to continue to use. Any received heavy blow, with cracked helmet, with or without damage to the phenomenon should be scrapped.
    (6) Do not use only the chin strap and helmet cap shell connection, that is, without a buffer layer inside the cap helmet.
    (7) construction workers in the field operations, shall not take off the helmet, set aside, or when using the cushion.
    (8) Since most of helmet use high-density low-pressure polyethylene plastic, with hardening and variable nature of slough. So you will not for a long time in the sun exposure.
    (9) new collar Fire helmet, first check whether there is evidence of the labor department to allow the production and product certification, look for damage, uneven thickness of the buffer layer and adjust the belt and the elastic strap is complete and effective. Does not meet the requirements of immediate replacement.
    (10) in the field and laboratory work should wear a helmet, especially when live working indoors, but also to carefully wear a helmet, because the helmet can not only anti-collision, but also play a role in insulation.

    (11) usually use the helmet should be kept clean, can not touch the source of fire, do not arbitrarily brushing paint, are not allowed as stools, to prevent loss. If lost or damaged, you must immediately reissued or replaced. No helmet will be allowed to enter the construction site.